Products > Valves > Ball > Flow-Tek 2-Piece Series S80 Ball Valve

Flow-Tek 2-Piece Series S80 Ball Valve

Flow-Tek Series S80 Ball Valve



Flow-Tek's Series S80 ball valves have been designed to meet the needs of the chemical, textile and process industries. Standard two piece valve bodies are available in Stainless Steel. Stainless Steel bodies are investment cast and solution annealed for the highest quality and added strength. All body castings are marked with a foundry heat number for full traceability. These quarter turn valves feature a full port design that minimizes pressure drops with smooth flow characteristics.

  • Low operating torque
  • Adjustable stem packing
  • Blowout proof stems
  • Stainless steel safety latch handles
  • All Series S80 valves comply with MSS-SP 72
  • All valves are tested in accordance with MSS-SP 72
  • Vacuum Service to 29 inches Hg gauge

Flow‐Tek’s technologically advanced ball valve design is the product of a highly evolved research and development program. Each valve incorporates premium components from certified vendors. The components that go into a Flow‐Tek valve must pass rigorous incoming quality inspection procedures. Each casting has a foundry heat number for traceability.

View Series S80 on Manufacturer's Website