The S series compact rotary electric actuator was specifically designed for severe applications and as in all ICI actuators can withstand stall conditions without suffering gear failure. The heavy-duty die-cast aluminum enclosure meets NEMA 4 specifications and has a thermally bonded ultraviolet resistant polyester powder coating that not only enhances its appearance but also is a tough corrosion resistant coating. ICI's product line consists of electric actuators with torques ranging from 100 lb-in (11 Nm) output torque through 27,300 lb-in (3 084 Nm) ouput torque. We offer an array of controls for the most mundane on/off control to sophisticated process control applications.

FEATURES

Output Torque: 200 Lb-In (22.6Nm) & 300 Lb-In (33.9 Nm)Cycle Time: 5 sec/90 ° rotationDuty Cycle: 25%Motor: 115Vac-50/60Hz-1Ph. StandardEnclosure: NEMA 4 StandardLubrication: PermanentTemperature: -40° F to +140° F (heater required below 0° F)Weight: 6 lbs.Switches: 16 A. 125/250VACCertification: CSA NEMA 4

• Brochure https://shop.craneengineering.net//ASSETS/DOCUMENTS/ITEMS/EN/Indelac S Series Product Data Sheet.pdf
• Maintenance https://shop.craneengineering.net//ASSETS/DOCUMENTS/ITEMS/EN/Indelac S Series Product Manual.pdf